Globaal server netwerk 

Hoe kan ik een VPN tunnel op mijn routor instellen

23 januari 2017 04:30

Configuring L2TP VPN on router enables you to connect to the VPN on multiple devices on your network, including computers, smartphones, tablets, Playstation, Xbox, Smart TVs and any other device that uses your router for Internet connection. By doing so, you won't need to separately configure VPN on each device as your router will automatically connect all the devices to the VPN.


This can be very useful if you live in another country and wish to access streaming services such as Netflix, ABC, Hulu Plus, iTunes, BBC iPlayer or any other streaming service or website that would require having a different IP address from the IP of the country where you live.


If you would like to configure WASEL Pro VPN on router to connect multiple devices at the same time and you're looking for a VPN router at reasonable prices, you should look for an L2TP VPN router.  


Below, we give you a list of recommended routers that support L2TP VPN protocol and require very little configuration to choose from.


These routers are available from Amazon and can be shipped to your location  


NETGEAR WNR3500L Price: $45.00


Linksys E2500 Price: $69.99


Linksys E900 Price: $35.00


ASUS RT-N16 Price: $82.99


How to configure L2TP VPN on Router NETGEAR


Go to the router's setup webpage and follow these steps:


Click "VPN" then choose "L2TP Server"


For "Username", type your WASEL Pro's registered e-mail address


For "User Type", choose "L2TP user"


For "Password", type your WASEL Pro's password


Then click "Apply"


How to configure L2TP VPN on Router Linksys


Go to the router's setup webpage and follow these steps:


Click on "Security" then choose "VPN"


"L2TP passthrough" should be enabled then Click "Save Settings"


Now, verify the following settings:


Local Secure Group: has to be the same as the local router’s LAN segment.


Remote Secure Group: has to be the same as the remote router’s LAN segment.


Remote Security Gateway: has to be the IP address of the L2TP server you would like to use.


Encryption and Authentication: has to be the same as that of the remote router.


Pre-shared Key and Key Lifetime: sharedsecret.


How to configure L2TP VPN on Router Asus


Go to the router's setup webpage and follow these steps:


Click "Advanced Setting"


Click "WAN" then "DMZ"


"VPN L2TP Passthrough" should be enabled then click 'Apply"